Venus Operating Instructions

button

LED display/operation instructions

Power button, press and hold to start/shut down the system

Press and hold to increase the temperature. When the temperature reaches the expected set value, release the button. The screen will flash for three seconds and the setting is completed. Press + and - simultaneously to go between Celsius and Fahrenheit.

Press and hold to increase the temperature. When the temperature reaches the expected set value, release the button. The screen will flash for three seconds and the setting is completed. Press + and - simultaneously to go between Celsius and Fahrenheit.

Temperature display (acceptable set temperature range): When it is always on, it is the current temperature; when it flashes, it indicates that it has entered the setting mode and can adjust the temperature. After the temperature setting is completed, the display will return to lighting (showing the current temperature).

Exception display:
E0: The battery is abnormal or low. Please replace the battery with a fully charged one or use the AC power cord to start the machine.

E3: The fan is abnormal. Please contact VIVANT.
E4: Temperature sensor is abnormal. Please contact VIVANT.

Display the battery status (up is increasing, down is decreasing)

Celsius temperature

Fahrenheit